| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| removing carbon fiber layer from a guitar body? http://www-.luthiersforum.com/forum/viewtopic.php?f=10123&t=54191 |
Page 1 of 1 |
| Author: | chrisjscott [ Sat Jun 05, 2021 2:11 pm ] |
| Post subject: | removing carbon fiber layer from a guitar body? |
I recently purchased a Parker PDF 70 (one of the low-end guitars Parker produced towards te end of the company's life). I wanted to strip it down to the mahogany body so I could clear coat it and install chrome hardware. I got as far as stripping the paint but discovered that the body is sealed in carbon fiber, as well (yes, I know Parkers are famous for this but I didn't realize that this later, entry-level model had it as well). There HAS to be a way to safely remove this carbon fiber and get to the wood underneath. Any clever ideas how I could do that? |
|
| Author: | Chris Pile [ Sat Jun 05, 2021 3:47 pm ] |
| Post subject: | Re: removing carbon fiber layer from a guitar body? |
Live with it. Trying to remove it will basically destroy the wood fibers underneath. Do NOT try to sand or grind it off. Carbon fiber dust is harmful to your sinuses and lungs. At the aircraft plants where I worked, if you were using a grinder on carbon fiber the rule was to flood the part with water to prevent the dust and chips going airborne. It will ruin electronics and other machinery. They fired a guy who grabbed a sander to work a small patch and then blew it off with an airgun. Took a whole day to clean the shop (the dust doesn't settle very fast). |
|
| Author: | Hesh [ Mon Jun 07, 2021 12:03 pm ] |
| Post subject: | Re: removing carbon fiber layer from a guitar body? |
What Chris said and I'll add Ken likely used ep*xy to laminate it to the body so it's bloody on there to stay. PS: I had a fly deluxe in Italian Plum and loved it. Never, never sell guitars you will always regret it, I regret selling my Fly. It also weighed 3.75 lbs and was a dream to play. |
|
| Author: | SteveSmith [ Mon Jun 07, 2021 6:17 pm ] |
| Post subject: | Re: removing carbon fiber layer from a guitar body? |
That’s funny, I had a Parker Fly deluxe for a few years and really liked it too. I sold it to buy a HD-28. Wish I still had the Parker. Sent from my iPhone using Tapatalk Pro |
|
| Author: | Hesh [ Tue Jun 08, 2021 3:53 am ] |
| Post subject: | Re: removing carbon fiber layer from a guitar body? |
SteveSmith wrote: That’s funny, I had a Parker Fly deluxe for a few years and really liked it too. I sold it to buy a HD-28. Wish I still had the Parker. Sent from my iPhone using Tapatalk Pro Me too my Parker was a great sounding and playing instrument and the acoustic tones from the pup were killer too. Ken Parker is also one of the most innovative Luthiers ever. |
|
| Author: | DennisK [ Fri Jun 25, 2021 10:07 am ] |
| Post subject: | Re: removing carbon fiber layer from a guitar body? |
Chris Pile wrote: At the aircraft plants where I worked, if you were using a grinder on carbon fiber the rule was to flood the part with water to prevent the dust and chips going airborne. Glad to hear it, as water is what I use to contain the dust when working with carbon or shell. I'd just make a new duplicate body before trying to remove all the paint and carbon from the old one. The wood underneath may not be good looking anyway. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|